logo

Clownfish, Philippines. Photo by Stephane Rochon.

A dive site atlas made by divers for divers
Enjoy and contribute!

 Genepesca Wreck

Italy, Toscana, Livorno

Other places:

This is an interactive map! Use controls to pan and zoom this map.

Datum: WGS84 [ Help ]
Precision: Approximate

GPS History (1)

Latitude: 43° 17.157' N
Longitude: 10° 27.827' E

User rating (0)


  • Favourite
  • Your favourites and future dive site lists

    Add dive sites to your profile

 Access

English (Translate this text in English): Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

English (Translate this text in English): Only by boat, preferrably with local dive center.

How? By boat

Distance Good boat time (< 30min)

Easy to find? Hard to find

 Dive site Characteristics

Average depth 20 m / 65.6 ft

Max depth 32 m / 105 ft

Current Medium ( 1-2 knots)

Visibility Medium ( 5 - 10 m)

Quality

Dive site quality Standard

Experience CMAS ** / AOW

Bio interest Poor

More details

Week crowd 

Week-end crowd 

Dive type

- Wreck

Dive site activities

- Dive training

Dangers

 Additional Information

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

English (Translate this text in English): The Genepesca ship sunk during the Second World War after being hit by a mine. It lies on the sea bed at a depth of about 30 metres. It is split into two halves, not because of the mine damage, but because of a failed recovery attempt.

The presence of a huge rope is proof of this. The two parts of the ship lie 40 metres apart. It is highly recommended that they are visited on two separate dives, although with Nitrox you may do it in one.

route 1:
The stern half of the ship is about 55 metres long and sits upright in a navigational position. It represents about two thirds of the entire ship and consists of the bridge, funnel, engine room, refrigerating coil and holds. Descend along the anchor (see note). It is normally possible to make a complete tour of the trunk of the ship and to spend a bit of time exploring from the outside.

There are brown meagre, seabream, conger-eels, morays and groupers. It is possible to enter the ship, but only experienced divers should do this, and only with the guide’s consent. The use of nitrox is ideal for this dive. The last part of the dive is spent on the bridge or another upper part of the ship. From here you can gain access to the collapsed engine room.

route 2:
The bow of the ship lies on its right-hand side at a maximum depth of 29 metres. It is about 20 metres long and always conceals a pleasant surprise of some kind. Unfortunately it has been looted over the years, but in among the sand and metal plate there is always inspiration for a good dive.

 Photos

Show all (0)...

No available picture

 Videos

Show all (0)...

No video available

 Dive logs

Show all (0)...

Kein Tauchlog

 Dive trips

Show all (0)...

Kein Tauchtrip

 Comments

Add comment

Show all (0)...

Be the first to comment this country

Errors, Feedback

You can edit this page to correct errors or add new information. If you have any problems regarding this page, Send us feedback.

Advertise

Wannadive.net 24/24

Wannadive.net on your mobile

Google Play Application

RSS All the RSS feeds of Wannadive.net

Newsletter All news by email